35
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Painted Surfaces
Painted surfaces include the top and
sides of the door, and the drawer front.
Clean these with soap and water or
a vinegar and water solution.
Do not use commercial oven cleaners,
cleaning powders, steel wool or harsh
abrasives on any painted surface.
Stainless Steel Surfaces
(on some models)
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the
stainless steel surface.
To inquire about purchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer or Mabe
Parts Store nearest you, please call our
toll-free number:
National Parts Center
1.800.626.2002 (U.S.)
1.800.661.1616 (Canada)
ge.com (U.S.)
www.GEAppliances.ca (Canada)
Oven Vent
The oven is vented through an opening
in the cooktop under the grille.
Never cover the opening with aluminum
foil or any other material. This would
prevent the oven vent from working
properly.
Control Panel
If desired, the touch pads may be turned off
before cleaning.
See the
Control Lockout
section.
Clean up splatters with a damp cloth.
You may also use a glass cleaner.
Remove heavier soil with warm soapy
water. Do not use abrasives of any kind.
Turn on the touch pads after cleaning.
Removable Oven Floor
To remove the oven floor for easier
cleaning:
Remove the oven door using the
instructions in the
Lift-Off Oven Door
section.
Grasp oven floor at the rear finger
slots on each side, lift it up, push it
back and pull it out.
Clean the oven floor with warm
soapy water.
IMPORTANT:
Always replace the
removable floor before the next use.
Oven floor
Center vent
ge.com (U.S.)
www.GEAppliances.ca (Canada)