background image

Part No. 183D5580P039
Pub No. 49-8837

WHAT IS COVERED

FULL ONE-YEAR WARRANTY

For one year from date of original
purchase, we will provide, free of
charge, parts and service labor in
your home to repair or replace
any part of the cooktop that fails
because of a manufacturing
defect.

This warranty is extended to
the original purchaser and any
succeeding owner for products
purchased for ordinary home use
in the 48 mainland states, Hawaii
and Washington, D.C. In Alaska the
warranty is the same except that it
is LIMITED because you must pay
to ship the product to the service
shop or for the service technician’s
travel costs to your home.

All warranty service will be
provided by our Factory Service
Centers or by our authorized
Customer Care

®

servicers during

normal working hours.

Should your appliance need
service, during warranty period or
beyond, call 800-GE-CARES 
(800-432-2737).

WHAT IS NOT COVERED

• Service trips to your home to teach

you how to use the product.

Read your Use and Care material.
If you then have any questions
about operating the product,
please contact your dealer or our
Consumer Affairs office at the
address below, or call, toll free:

GE Answer Center

®

800.626.2000
consumer information service

• Improper installation.

If you have an installation problem,
contact your dealer or installer.
You are responsible for providing
adequate electrical, gas, exhausting
and other connecting facilities as
described in the Installation
Instructions provided with the
product.

• Replacement of house fuses or

resetting of circuit breakers.

• Failure of the product if it is used

for other than its intended purpose
or used commercially.

• Damage to product caused

by accident, fire, floods or acts
of God.

WARRANTOR IS

NOT

RESPONSIBLE FOR
CONSEQUENTIAL DAMAGES.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion

may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.

Warrantor: General Electric Company

If further help is needed concerning this warranty, write:

Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225

JGP645

4-97

CG

YOUR GE COOKTOP

WARRANTY

Staple sales slip or cancelled check

here. Proof of original purchase date 

is needed to obtain service 

under warranty.

Printed in Mexico

Содержание JGP645





























Отзывы: