background image

4

IMPORTANT SAFETY INSTRUCTIONS

(continued)

Using Your Cooktop 

• Do not leave children alone or unattended

where a cooktop is hot or in operation. They
could be seriously burned.

• CAUTION: Items of interest to children should 

not be stored in cabinets above a cooktop—
children climbing on the cooktop to reach items 
could be seriously injured.

• When raising or lowering the vent, keep fingers

away from all vent parts; assure that cookware,
pans and handles will not be struck and tipped
when raising the vent.

• Do not operate or clean your cooktop if the

glass is broken or cracked. Cleaning solutions
and spillovers could penetrate the broken cooktop
and create a risk of electric shock. Call for service
immediately if the cooktop glass breaks or cracks.

• Clean the cooktop with caution. If a wet sponge

or cloth is used to wipe spills on a hot cooktop, be
careful to avoid steam burns.

• Do not clean the cooktop with flammable or

volatile cleaning fluids.

• Do not clean the cooktop when the appliance 

is in use. 

• Avoid scratching the cooktop with sharp

instruments, or with rings and other jewelry.

• Never use the cooktop as a cutting board.

• Let the burner grates and other surfaces cool

before touching them or leaving them where
children can reach them.

• Never wear loose-fitting or hanging garments

while using the appliance. Be careful when
reaching for items stored in cabinets over the
cooktop. Flammable material could be ignited if
brought in contact with flame or hot surfaces and
may cause severe burns.

• For your safety, never use your appliance for

warming or heating the room.

• Do not use water on grease fires.

Never pick up a flaming pan. 
Turn the controls off. Smother a

flaming pan on a surface burner by covering the 
pan completely with a well-fitting lid, cookie
sheet or flat tray. Use a multi-purpose dry
chemical or foam-type fire extinguisher. 

Flaming grease outside a pan can be put out 
by covering it with baking soda or, if available, 
by using a multi-purpose dry chemical or foam-
type fire extinguisher.

• Do not store flammable materials near the

cooktop. Do not store or use gasoline or other
flammable vapors and liquids in the vicinity of
this or any other appliance.

• Do not let cooking grease or other

flammable materials accumulate
on or near the cooktop. 

• Never leave surface burners unattended at

high flame settings. Boilovers cause smoking 
and greasy spillovers that may catch on fire.

• Adjust surface burner flame size so it does 

not extend beyond the edge of the cookware.
Excessive flame is hazardous.

• Use only dry pot holders—

moist or damp pot holders on hot
surfaces may result in burns from

steam. Do not let pot holders come near open
flames when lifting cookware. Do not use a towel
or other bulky cloth in place of a pot holder.

• To minimize the possibility of burns, ignition 

of flammable materials and spillage, turn
cookware handles toward the side or center 
of the cooktop without extending over adjacent
burner or vent area.

Содержание JGP645





























Отзывы: