PARTS INCLUDED
NOTE:
This kit has extra screws to prevent the
technician from spending extra time locating a
replacement screw during installation.
PART
QUANTITY
❒
Trim Frame
1
❒
Bottom Duct
1
❒
Top Bracket
1
❒
Bottom Bracket
1
❒
Upper Duct
1
❒
Rear Duct
1
❒
4 mm x 14 mm
22 required
Round-Head 2
extra
Screws
❒
4 mm x 14 mm
4 required
Flat-Head 2
extra
Screws
❒
Anti-Tip Brace
1
❒
Anti-Tip Bracket
1
❒
Template
1
READ CAREFULLY.
KEEP THESE INSTRUCTIONS.
Installation
Built-In Trim Kits
Instructions
JX1527 JX1530
1
❒
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT
—
Save these instructions
for local inspector’s use.
•
IMPORTANT
—
Observe all governing
codes and ordinances.
•
Note to Installer –
Be sure to leave these
instructions with the Consumer.
•
Note to Consumer –
Keep these instructions for
future reference.
•
Skill level –
Installation of this appliance requires
basic mechanical and electrical skills.
•
Completion time –
1 to 3 hours
•
Proper installation is the responsibility of the
installer.
•
Product failure due to improper installation is not
covered under the Warranty.
•
This kit is UL listed for installation alone
or over any GE/GE Profile single electric wall oven.
•
For easier installation and personal safety, we
recommend that two people install this microwave
oven.
•
Unplug the microwave oven before attempting
installation of this kit.
•
This kit is for use on models: PEB1590DMBB,
PEB1590DMWW and PEB1590SMSS.
•
Do not alter or modify any part of this kit or the
oven.
WARNING
—
This oven must
be plugged into a properly grounded 3-hole, 120V
receptacle as required by the National Electrical Code.
FOR YOUR SAFETY:
WARNING
—
Before beginning the
installation, switch power off at service panel and lock
the service disconnecting means to prevent power
from being switched on accidentally. When the
service disconnecting means cannot be locked,
securely fasten a prominent warning device,
such as a tag, to the service panel.
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
