GE Interlogix 60-875 Simon Скачать руководство пользователя страница 28

Страница: 28 / 40

Simon Security System

Delete

disables chime voice. The panel will not announce which chime sensor has been

tripped but will still chime 2 times for doors and 3 times for motion sensors when a
given sensor is tripped.

Open panel cover. Panel announces,

Use numbered keys to enter ID.

Enter Access Code using the numbered keys. Panel announces,

Please select from

Start Menu.

Press

Delete

from the Start menu. Panel announces,

Select from main menu

Press

Option

. Panel announces,

Option 1, press again for next option or done to

select.

Press

41.

Panel announces,

Option 41, press again for next option or done to delete

Press

DONE

. Panel announces,

Option 41 deleted.

Option 42 - Speaker Level

When this option is turned on you can set the panel speaker level from 1 (the lowest
voice level) to 8 (the highest voice level). When you turn this option off, the speaker
level is set to 8 (the highest voice level).

Add

allows you to set the speaker level from 1-8.

Open panel cover. Panel announces,

Use numbered keys to enter ID.

Enter Access Code using the numbered keys. Panel announces,

Please select from

Start Menu.

Press

Add

from the Start menu. Panel announces,

Select from main menu

Press

Option #

. Panel announces,

Option 1, press again for next option or done to

select.

Press

42.

Panel announces,

Option 42, press again for next option or use numbered

keys to enter option.

Enter the voice level (1 - 8) with the numbered keys.

Panel announces the speaker level that has been selected

Delete

sets the speaker level to 8 (the highest voice level).

Open panel cover. Panel announces,

Use numbered keys to enter ID.

Enter Access Code using the numbered keys. Panel announces,

Please select from

Start Menu.

Press

Delete

from the Start menu. Panel announces,

Select from main menu

Press

Option #

. Panel announces,

Option 1, press again for next option or done to

select.

Press

42.

Panel announces,

Option 42, press again for next option or done to delete.

Press

DONE

. Panel announces,

Option 42 deleted.

Option 43 - Pager/Voice Event Notification Phone Number

Add

enables the pager/voice event notification (remote phone) phone number and

allows you to program up to 26 digits, including pauses.

Note

More than 3 or 4 pauses
may need to be added to
ensure a message is
received.

Add 3 or 4 pauses to the end of the phone number to ensure the complete pager/voice
event notification message will be received. Press the

Test

button to program a pause

into the phone number.

Open panel cover. Panel announces,

Use numbered keys to enter ID.

Enter Access Code using the numbered keys. Panel announces,

Please select from

Start Menu.

Press

Add

from the Start menu. Panel announces,

Select from main menu

Press

Option #

. Panel announces,

Option 1, press again for next option or done to

select.

Press

43.

Panel announces,

Option 43, press again for next option or use numbered

keys to enter phone number, then press done.

Содержание Interlogix 60-875 Simon









































Результаты поиска

Содержание Interlogix 60-875 Simon

Отзывы:

Похожие инструкции для Interlogix 60-875 Simon

Бренды по названию

Популярные бренды

GE Interlogix 60-875 Simon, Руководство пользователя

Результаты поиска

Содержание Interlogix 60-875 Simon

Отзывы:

Похожие инструкции для Interlogix 60-875 Simon

Бренды по названию

Популярные бренды