GE GXSF35E Скачать руководство пользователя

Страница: 11 / 64

GEAppliances.com

Optional Control Settings

The controller display has several options and features.

LOW SALT ALARM

The

LOW SALT ALARM

, when enabled,

will sound the beeper when the

DAYS

TO EMPTY

value is 15 days or less. To

change this setting, press and hold the

MODE

button for

3 seconds. ON (factory default) or OFF will flash in the
display. Press the UP

or DOWN

buttons to toggle

this feature ON or OFF. Press the

MODE

button to accept,

and the display will move to

SALT EFFICIENCY.

SALT EFFICIENCY

When the

SALT EFFICIENCY

feature

is ON, the unit will operate at a salt
efficiency of at least 4000 grains of
hardness removed per pound of salt. This mode of
operation is the most efficient setting for salt usage,
because the system will tend to recharge more often,
with less salt usage. Turning the feature OFF will tend
to lengthen the time between recharge cycles, which will
provide the most efficient usage of water, but may use
more salt. The degree of difference between these
two cycles is highly dependent on the water usage and
hardness at a particular installation.

If you have very hard water, and you find your system
is regenerating every 1-2 days, turn the

SALT EFFICIENCY

to OFF to lengthen the time between regenerations.

NOTE:

California Regulations require this feature to be

ON for installations in California.

To change the setting, press the UP

or DOWN

buttons to toggle the feature ON or OFF. Press the

MODE

button to accept. The display will move to

SYSTEM/ELECTRONIC DIAGNOSTICS

This display contains system
diagnostics information to assist in
troubleshooting problems with the
system. See pages 15–18 for details.
Press the

MODE

button to return to

the normal run display.

LOST TIME SIGNAL

If time is lost on the display due to power interruption, the
blue indicator light will flash 4 times every second, until the
present time of day is entered.

LOW SALT SIGNAL

When the

DAYS TO EMPTY

drops to 15, the blue indicator

light and

DAYS TO EMPTY

in the display will flash every

second and the alarm will beep every 30 seconds (from
8:00 AM to 8:00 PM), to notify the user that the unit is
running low on salt. As soon as any button is pressed,
the alarm will stop beeping. The blue indicator light and

DAYS TO EMPTY

will continue to flash. Once salt is added

to the brine tank and the

SALT LEVEL

is reset, the

DAYS TO

EMPTY

will be reset.

ERROR SIGNALS

If there is an error code detected, the
blue indicator light will flash 4 times
every second, the display will flash

Err

and the alarm will beep every 30 seconds (from 8:00 AM
to 8:00 PM), to signal that the softener requires service.
The alarm can be turned off by pressing any button, but
the blue indicator light and display will continue to flash.

See page 16 for information to assist in troubleshooting
error codes. Once the problem is corrected, disconnect the
transformer from the wall outlet momentarily, and plug it
back in. The normal display will appear. The motor may
run for several minutes, as the unit resets. If the problem is
not corrected, the error code will reappear in 6 minutes.

BLUE INDICATOR LIGHT

Steady blue light indicates that the unit is working
correctly. The light flashes when the unit needs attention
from the user.

•

Light flashes and

DAYS TO EMPTY

flashes—check salt level

and add salt as required.

•

Light flashes and

Err

is in the display—electrical problem

with system—see page 16.