About Appliance Communication.
CleanSpeak
TM
This dryer can communicate with a compatible
washer (one whose Owner’s Manual contains a
CleanSpeak
description) via a cable between these
appliances. This cable comes with
CleanSpeak
dryer models or may be purchased separately.
At the end of the wash cycle, the washer sends a
signal to the dryer to indicated a preferred dry cycle.
When the dryer becomes idle (
“End”
display times
out - or- the door is opened)
“CYCLE”
will scroll
across its cycle time display, its current cycle knob
setting LED will be lit, and (if different) a second
recommended cycle LED will blink. If
“CYCLE”
times
out, pressing
Power
will refresh it and the LEDs. If
the dryer cycle knob is turned , the solid LED will
move accordingly. Pressing the dryer
Start
will
initiate the cycle knob setting (solid LED) and turn off
the recommended (blinking LED) if a different cycle
is started.
Dryer
Washer
10
Brillion Enabled Communication
This dryer (and/or compatible washer) can
communicate with your Home Computer and/or
iPhone
®
. By using the GE Nucleus
™
Home Energy
Manager and Appliance Communication Module
(ACM) you will be able to see the following:
On your home computer or iPhone
®
:
:KLFKF\FOHLVUXQQLQJDQGZKDWLWVFXUUHQWF\FOH
segment is (example, “Cool Down”).
7KHHVWLPDWHGWLPHUHPDLQLQJRIWKHF\FOHWKDW
has been selected.
When a cycle has completed or if it requires
maintenance or servicing.
$OHUWVQRWLI\LQJ\RXLIWKHZDVKHUQHHGV
maintenance or servicing.
What your software allows you to do:
NOTE:
Messages are displayed in English. See
www.gebrillion.com
or call 1-800-220-6899 for
possible language options.
Cycle display will provide the current status of the
wash cycle:
'U\LQJ'DPS&RRO'RZQRU&RPSOHWH
Alerts will notify you of problems.
Some
examples:
,QOHW7KHUPRVWDWSUREOHP
2XWOHW7KHUPRVWDWSUREOHP
What you will need for two-way communication:
1XFOHXVKRPHHQHUJ\PDQDJHUPRGHO
$SSOLDQFHFRPPXQLFDWLRQ0RGXOHPRGHO
%URDGEDQGFRQQHFWLRQZLWKURXWHU:L)LIRU
iPhone
®
connection)
&RPSXWHU0DF
®
or PC) and/or Internet capable
iPhone
®
.
NOTE:
If you also have a compatible
Energy Smart
washer, see Installation Instructions for additional
parts.
Installation
Step 1:
Install your Nucleus Home Energy Manger/
Cable - near your internet router.
Refer to the Quick Start Guide/Installation
Instructions included with this device for
information needed to download software to
a desktop and/or iPhone
®
.
Step 2:
Install your Appliance Communication
Module (ACM) in your Laundry area. Determine
the most convenient location for your ACM. Install
the ACM according to the Quick Start/Installation
Instructions included with the device.
Step 3:
Connect your ACM to your dryer or dryer-
washer.
The ACM comes with a splitter, two 6’ cables, and a
1’ cable (see
Parts and Accessories
section). If you
also have an
Energy Smart
washer, use the splitter
to connect both appliances.
NOTE:
If this dryer
did not come with a 6 foot cable, you may need
to purchase a second 6 foot cable (see
Parts and
Accessories
section).
For more information or questions, please visit:
www.gebrillion.com
or call 1-800-220-6899.
Dr
ye
r
ACM
Dryer
Washer
Spliter
ACM
- OR -
