GE GCG1500 WW, Техническое обслуживание руководство

Страница: 13 / 26

– 13 –
Built-In Compactor Components
Control Panel
To remove the control panel:
1. Open the compactor drawer. Turn the knob to
the off position and remove it by pulling straight
out.
2. Remove the 2 Phillips-head screws from the
knob recess.
Switch Bracket
To remove the switch bracket:
Disconnect power.
Remove the control panel. (See
Control Panel
.)
Remove the 3 Phillips-head screws that attach
the switch bracket to the frame.
1.
2.
3.
Insert a small-bladed screwdriver between the top
of the control panel and the front cover.
Pry the control panel forward and release it
from the 3 top tabs.
3.
4.
Lift the control panel from the 3 bottom tabs. 5.
Raise the switch wiring harness parallel to the
bottom of the switch bracket.
4.
Pull the bottom of the switch bracket out to
clear the bottom of the front cover opening.
Rotate it approximately 45° counterclockwise
then remove the switch bracket from the front
cover opening.
5.
Switch Wire
Harness
Switch Bracket
(
Continued next page
)