Page
53
of
79
[EN] English – K0571 Issue 1
User Manual
Druck DPI611
2.4.2
IDOS Function Procedures
The procedures for an IDOS module are the same as for the internal
pressure sensor.
Enable the IDOS module from the TASK menu:
•
IDOS function (Measure or Differential)
•
If necessary, change the Units for the function
•
If necessary, set a Utility for the function:
I.
Max/Min/Avg
II.
Switch Test
III.
Leak Test
IV.
Relief Valve
The Settings menu for the IDOS module contains the following
options.
•
Units.
•
Process (Tare, Alarm, Filter, Flow, Scaling).
•
Zero. The procedure is the same for an IDOS module or the
internal pressure sensor. Zero the gauge sensor before use.
•
Resolution. Select the number of digits to be displayed.