[EN] English - K0394 Issue 3
To Start
5
Table 3:
(Part of Table) Key to figure A3
Prepare the instrument
Before using the instrument for the first time:
• Make sure that the instrument is complete and undamaged.
• Install the battery (refer to installation, Table 4: page 7). Then
re-attach the display bezel [A1: item 6].
Power on or off
Refer to Quick Start, Safety Instructions and User Guide.
When the power is off, the last set of configuration options stays in
memory.
Note: The DPI 104 uses a small quantity of power while it is OFF. To
put into storage for a long period, disconnect the battery (refer to
menu operations
).
Menu operation
Option Description
(E)
Part No. 1S-04-0027: 8-pin connector for A1: item 1. Refer to
Table 6.
(F)
Part No. 182-190: DPI 104 high pressure adaptor (9/16 UNF to
3/8 BSP) for a PV212 hydraulic hand pump [range
≥
1000 bar
(15000 psi)].
Menu Description
Steps
Result/Subsequent steps
1
2
OFF
=
Power supply:
OFF only.
-
Power goes off.
unitS
=
Set units:
(A2: item 14).
Pressure value changes to the applicable units:
psi, mbar, bar ...
t
On
=
Set tare (or set zero):
Set to
On or OFF.
On
➤
t
A 00.000 : Set a tare value (refer to Table 7,
page 9).
OFF
=
Monitor
maximum/minimum:
Set to On or OFF.
Monitor function is set on or off.
OFF
=
Monitor a pressure switch:
Set to On or OFF.
Monitor function is set on or off.
(Continued - Page 6).
