GE CyberDome II, Руководство пользователя

Страница: 13 / 60

Chapter 1
Programming
5
Camera system menu
When accessing the CyberDome II series, with no Memory indication flashing, the following four menus
display:
• Product information
• System information
• Password
• Program select
Memory indication flashing
If the settings stored in the memory of the housing differ from the settings stored in the memory of the camera
(PTZ),
Memory will flash on your monitor. When you log on, you will see the Memory management menu
( Figure 3 ) asking you to choose which settings you want. The settings you choose overwrite the settings you
have chosen not to use. Until you decide which settings to use, the unit will use the settings stored in the
camera. Once the settings have been successfully transferred,
Memory will stop flashing on the monitor.
The Memory management screen appears after the Version screen in the menu sequence. So if the memory
message is flashing, the menu order will be Product information > System information > Memory > Program
selec t.
Figure 3. Memory flashing menu
Note: There are DIP switch settings on the camera that you can set that will automatically pull the settings from the housing,
or push the settings from the camera to the housing. See the
CyberDome II Installation Manual for more information.