GE CyberDome II, Руководство пользователя

Страница: 37 / 60

Chapter 1
Programming
29
7. Repeat steps 3 through 5 of the previous process, and steps 1 through 6 of this process for any
additional area titles. Otherwise, press iris - to return to the previous menu.
Note: If you set an area title, when you press iris- to return to the previous menu, the camera will display a screen
that says Mapping Areas , and will show you a percent complete.
Camera title
Some CyberDome II models can show a title for the camera. To set a title for the camera, do the following:
1. Navigate to the Edit titles/areas menu ( Figure 35 on page 26).
2. Navigate to option 3 and press iris + . The Title entry menu displays ( Figure 40 ).
3. Confirm that cursor (arrow) is under the camera ### (three-digit number).
4. To move the display location for the title up or down on the screen, move the joystick up and down.
(The title cannot be moved from left to right.)
5. To enter or edit the title, move the cursor to the right (inside the carets).
6. Move the joystick up and down to scroll to the desired alphanumeric character.
7. Move the joystick right or left to move to the next character or edit the previous character.
8. When the title is complete, press the iris + button to save the title and return to the Edit Title/Areas
menu.
Tour title
Some CyberDome II models can show a title when on a tour. To set a title for a tour, do the following:
1. Navigate to the Edit titles/areas menu ( Figure 35 on page 26).
2. Navigate to option 4 and pan right. The Tour titles menu displays ( Figure 41 ).
Figure 41. Tour titles menu
3. Use the keypad to enter the number (1 through 8) of the tour to be titled and programmed. The Tour
title entry menu displays.