GE Corometrics 250cx Series, Руководство оператора

Страница: 176 / 250

16-4 250cx Series Maternal/Fetal Monitor Revision C
2036946-001
Troubleshooting: Ultrasound Troubleshooting
Ultrasound Troubleshooting
Ultrasound Troubleshooting
Problem Probable Cause Possible Solution
Ultrasound not functioning properly.
„
Transducer not properly connected to
monitor.
„
Transducer placement.
„
Too little gel applied to transducer.
„
Defective transducer.
„
Active fetus or mother. Fetal arrhythmia or
hiccups. Extreme maternal obesity.
„
No signal.
„
Service required.
„
Ensure that transducer is securely
attached to monitor.
„
Wait before moving transducer; FHR
often returns. Reposition transducer.
„
Apply more gel.
„
Replace transducer.
„
Use alternate technique.
„
Auscultate FHR.
„
Call Biomedical Engineering
Department.
„
Check maternal pulse to ensure
monitoring of FHR.
Static noise on ultrasound.
„
Active fetus.
„
Environmental noise.
„
Maternal movement.
„
Defective transducer.
„
Reposition transducer.
„
Keep sheets and gown off transducer.
Do not hold transducer with hand.
„
Use alternate monitoring mode.
„
Replace transducer.
Rate on FHR area of display and FHR
trend on strip chart paper do not correlate. Monitor is set for 30 bpm/cm vertical scale
and 20 bpm/cm vertical scale strip chart
recorder paper is being used (or vice versa). Call Biomedical Engineering Department.