GE Corometrics 250cx Series, Руководство оператора

Страница: 113 / 250

Revision C 250cx Series Maternal/Fetal Monitor 9-9
2036946-001
Maternal Pulse Oximetry Monitoring: MSpO
2
Setup Screen
MSpO
2
Setup Screen
Select the
MSpO
2
softkey to access the
MSpO
2
Setup
screen. (See figure below.)
Nellcor MSpO
2
Setup Screen
NOTES
‹ A Masimo
MSpO
2
Setup
Screen differs slightly from the Nellcor Setup
Screen. The
Response Time
field is absent, and it is replaced by a
Sensitivity
field followed by an
Averaging Time
field.
‹ An Ohmeda
MSpO
2
Setup
Screen also differs from the above example as the
Response Time
field is absent.
Response Time (Nellcor 506 Technology Only)
Before you begin, confirm which Nellcor Technology your monitor contains. Refer
to “Nellcor OxiMax®” on page 9-5 for instructions. Choose a response time mode
in order to compensate for different levels of patient activity.
„
Normal:
Useful when patient is unavoidably active, least affected by patient motion.
„
Fast:
Factory default setting. Useful in most clinical situations for relatively
inactive patients.
Response Time (Nellcor NELL-3 Technology Only)
Before you begin, confirm which Nellcor Technology your monitor contains. Refer
to “Nellcor OxiMax®” on page 9-5 for instructions. If your monitor contains NELL-
3,
Fast
is the only available setting.
Sensitivity (Masimo Technology Only)
This menu option appears only when using Masimo Technology and sensor.
„
Normal:
Use the
Normal Sensitivity
setting for normal patient monitoring purposes.
„
Maximum:
Use the
Maximum Sensitivity
setting for improved low perfusion
performance and for faster tracking of rapid MSpO
2
saturation changes.
165 172 30
97%
MSpO
2
US FECG
TOCO
Alarms High Low
MSpO2: 100 95 %
MHR/P: 120 50 bpm
Alarm Volume:
Response Time:
Print Interval:
% O2 Trace:
MSpO
2
Setup
Fast
5 min
Off
5
Exit