1900/27 Vibration Monitor Operation and Maintenance Manual
6
2. Installation
This section describes how to install the 1900/27 Vibration Monitor. It includes
information on how to configure the monitor for your particular application using
the monitor's internal jumpers and the configuration switches on the front panel.
This section also describes how to connect the Accelerometer to the 1900/27
Vibration Monitor.
2.1 Receiving
Inspection
Inspect
the
components
of
the
order
as
soon
as
you
receive them
to
see
if
there
was
any
damage
during
shipment.
Keep
all shipping forms and invoices. If any
shipping damage is apparent, file a claim with the carrier and submit a copy to
Bently Nevada Corporation. Include all model numbers and serial numbers with
the claim. We will either repair or replace damaged parts according to the terms
and conditions of the sale.
A plastic cover will be over the display when the monitor is shipped from Bently
Nevada. Remove the cover from the label either when you receive the monitors or
during installation.
2.2 Jumper Settings
Use
internal
jumpers
to
program
each
relay
as
latching or
non-latching
and
normally
energized
or
de-energized.
Use
the Bypass Mode jumper to program
what 4 to 20 mA interface does during relay bypass.