7
Ensure cable is
secured by spring
clips at each end of
the light fixture.
Option B Installation Steps
1
2
3
Loop two cables around a structural member and
secure ends with stop sleeves or wire clamps.
Loop opposite end of cables through top light
hangers and secure with stop sleeves or wire
clamps.
Connect light engines to drivers directly or
by using inter-connection cables (see next
section for details).
Stop sleeve
or
wire clamp
Structural member
Inter-connection cable to driver
ATTENTION / ATTENTION
• Installer is responsible for suspension cable assembly.
• Test cable with at least 5x luminaires weight.
• L’installateur est responsable de l’assemblage du câble de
suspension.
• Tester le câble avec au moins 5 fois le poids des luminaires.
