GE ArcamEBM Spectra H, Руководство по установке

Страница: 12 / 85

4
About
This
Manual
4 4..1 1 G Ge en ne erra all
This manual describes the installation and commissioning of the equipment. The scope of this manual is to
ensure a smooth installation and commissioning of the equipment.
4 4..2 2 V Va alliid diittyy
C Ca au uttiio on n
Read this manual with full attention before you start to work with the equipment.
The information provided in this manual refers to the current develop-
ment state and manufacturing release of the product at the time of
issue.
This manual is produced by:
A Arrcca am m E EB BM M
Krokslätts Fabriker 27A
SE 431 37 Mölndal
Sweden
Phone: +46-31-710 32 00
support@arcam.com
www.arcam.com
4 4..3 3 D Do occu um me en ntt U Up pd da atte ess
Future changes and development of the product might out-date the information in this document.
Earlier product versions might also differ from information given in this document, in such cases please re-
fer to earlier document versions.
For latest up-to-date manual contact Arcam EBM Service via support@arcam.com .
4 4..4 4 P Prro op pe err U Usse e
Always use the tools and equipment delivered in the Start Pack and Site Pack. The tools are dedicated for
each machine model/type and shall not be altered.
The equipment is only designed and tested for the use within an Arcam EBM System solution for produc-
tion of metal components.
This includes:
8 01 IM-710429 en-GB