GE AquaTrans AT868, Краткое руководство

Страница: 42 / 67

September 2004
2-16 Programming Site Data
Setting Up a Frequency
Output
1. At Output B or D , select OFF or FREQ and press [ENTER] .
2.
Do one of the following:
•
If you selected
OFF
, the meter returns to the
Global I/O
menu.
Go to Setting Up a Totalizer Output on the next page.
•
For 1-channel meter, go to step 4.
•
For a 2-channel meter, go to step 3.
3.
At
Channel
, press [
X
] to select the desired channel and press
[ENTER] .
4.
Press [
X
] to select the desired measurement parameter and press
[ENTER] .
Note:
The measurement units that appear in these prompts are those
selected in the
GLOBL-SYSTM
menu earlier in this chapter.
5.
At
BASE
, enter a value for the low end of the output range
(-2,000,000 to 2,000,000) by using the arrow keys. Press [
W
]
and
[
X
] to move the cursor to the desired location and press
[
S
]
and
[
T
]
to increase or decrease the number. Then press
[ENTER]
.
6. At
FULL
, enter a value for the high end of the output range
(-2,000,000 to 2,000,000) by using the arrow keys. Press [
W
]
and
[
X
] to move the cursor to the desired location and press
[
S
]
and
[
T
]
to increase or decrease the number. Then press
[ENTER].
7.
At
FULL SCALE FREQ
, enter a value for the full scale of the output
(between 10 to 100,000) by using the arrow keys. Press [
W
]
and
[
X
] to move the cursor to the desired location and press
[
S
]
and
[
T
]
to increase or decrease the number. Then press
[ENTER].
8. At Error handling, press [
X
] to select the desired option for
handling errors (
HOLD, LOW, HIGH
, or
OTHER
) and press
[ENTER]
.
9. If OTHER is selected, the Error frequency display appears. This
allows the user to enter a set value for this option. Enter the
desired error frequency by using the arrow keys. Press [
W
]
and
[
X
] to move the cursor to the desired location and press
[
S
]
and
[
T
]
to increase or decrease the number. Then press
[ENTER]
.