GE Amersham Imager 680, Руководство по эксплуатации

Страница: 222 / 252

Action Step
If too many bands are detected, then use the Sensitivity minus button to
decrease the sensitivity. 2
If too few bands are detected, then use the Sensitivity plus button to increase
the sensitivity.
To make manual changes, select one detection channel from: Sample,
Markers, Blue, Green or Red above the image and select one or more rele-
vant options. 3
•
To create a new band, point to the position in the image.
Result: A new highlighted band appears.
•
To shift a band position, select the band and shift the band position up
or down with the Position arrow buttons.
•
To adjust a band width, select the band and adjust it with the Width plus
and minus buttons.
•
To delete a band, select the band and click Delete.
•
To delete all detected bands in the image, select Clear.
Repeat actions in step 3 for other detection channels, if relevant. 4
When you are done detecting bands click the Next button or select the MW
button in the workflow. The Previous button will bring you back to the previ-
ous step. 5
222 Amersham Imager 680 Operating Instructions 29271308 AB
6 Analysis software
6.2 Software operation
6.2.3 Band detection