background image

Modifications 

Reserved 

 

 

   3 

OPM_ITS_USM_M06_M20_0US_V011  (09/2007) 

 

 

2.3  Transport / storage 

  No liability can be accepted for any transport damage when the equipment is shipped in non-original packaging. 

  Store the UPS in a dry location with the batteries in a fully charged state. Storage temperature must be within 5

°

F (-15 

°

C) to 113 

°

F (+45 

°

C).

 

 

 

CAUTION 

 

In case of storage, pay attention to:

 

 

 

2.4  Warranty and RMA Process 

GE Consumer & Industrial, operating through its authorized agents, warrants that the standard products will be free of defects in materials and 

workmanship for a period of twenty-four (24) months after the date of shipment, or such other period as may be specified.    Contact the 

GE 

UPS Service Center

 for help at 

800-637-1738

 

 

 

NOTE 

This warranty does not cover failures of the product, which result from incorrect installation, misuse, 

alterations by persons other than authorized agents, or abnormal operating conditions.

 

 

3 -    Installation 

 
3.1 Package contents 

Inspect the package contents against the supplied packing slip.    Inspect the UPS for damage after unpacking. If any damage is present please 

immediately notify the carrier and place of purchase.    Please save or recycle the packaging materials! 

Shipping kit supplied with UPS:

 

 

• 

(1) USB COMMUNICATION CABLE

 

 

• 

(1) SERIAL COMMUNICATION CABLE 

• 

(1) POWER CORD 

• 

(1) RJ11 TELEPHONE CORD 

• 

(1) CD SOFTWARE WITH IMBEDDED USER MANUAL 

• 

(1) USER MANUAL

 

• 

(2) MOUNTING EAR BRACKET (19” RACK MOUNT UNITS ONLY)

 

 

 

 

WARNING

 In case of recognizable damage: 

DO NOT

 connect any voltage to the unit 

DO NOT

 put the unit into operation

 

Содержание Amersham Imager 600
































Отзывы: