Modifications
Reserved
26
OPM_ITS_USM_M06_M20_0US_V011 (09/2007)
Appendix B: Specifications
Note:
Characteristics are subject to change without prior notice.
Rack Model #
UPS0600ITSIR
UPS1000ITSIR
UPS1500ITSIR
UPS2000ITSIR
Tower Model #
UPS0600ITSIT
UPS1000ITSIT
UPS1500ITSIT
UPS2000ITSIT
Topology
Line Interactive
Output VA/Watts
600VA/360W
1000VA/600W 1500VA/900W 2000VA/1200W
Output Power Factor
0.6
Output voltage (Battery Mode)
120V, Pure sine wave at +/-5% of nominal, -10% of nominal after low battery warning
Output Voltage (Utility Mode)
120V, +/-10%
Output Frequency
50/60 Hz +/- 0.5% (Auto sensing: default 60Hz or follows latest I/P frequency)
AVR Boost/Trim
Boost 17%, Buck 14%
Output voltage THD
<5%, @ 100% resistive load with 80% battery capacity
Input voltage at full load 120V,
+/-10%
Input current at nominal voltage
6 max.
10 max.
15 max.
20 max.
Input – Buck / Comeback
128/131, +/- 3V
Input – Boost / Comeback
109/112, +/- 3V
Low line loss / comeback
90/95, +/- 3V
High line loss / comeback
150/145, +/- 3V
Input Frequency (Hz)
50 or 60 Hz +/-5Hz (Auto sensing)
UPS efficiency
On Battery: >80% with 100% resister load. On Utility: >95% @ full charged battery & 100% Resistive load
Voltage Drop in Transformer in
Utility mode @ 100% load
< 2V
Acoustic noise (dBA)
<40dBA (1 meter from surface)
<45dBA (1 meter from surface)
Ambient temperature
⁰
F (
⁰
C)
3,500 meters max. elevation, 32-95
⁰
F (0-35
⁰
C)
Humidity
0-95% humidity non-condensing,
# of Outlets (NEMA 5-15R)
Tower: 4, Rack Mount: 4
Tower: 4, Rack Mount: 4
Tower: 6, Rack Mount: 4
Tower: 6, Rack Mount: 6
Input line 6Ft, Cord
NEMA 5-15P
NEMA 5-20P
Enclosure Specifications for Rack
Mount Models
Compatible with 19” Rack
Fan speed
Tower: Temperature and Load dependent, Rack Mount:
Constant
Front display
LED
Audio Alarm: Battery mode:
Slow beeping sound (about 0.25Hz)
Battery low/charger fault:
Rapid beeping sound (about 1Hz)
UPS fault:
Continue beeping sound
Overload: Continue
beeping
sound
Sleep mode
Dual rapid beeping sound every 5 sec.
Alarm silence:
by push-on button for 1 second
UPS parameters user configurable
Software Via RS-232
Battery replacement procedure
Hot swappable
Battery type
34W, Maintenance free sealed Lead Acid battery with 2 to 4 years typical lifetime
Battery capacity
(12V /34W) x 2
(12V/34W) x 2
(12V/34W) x 3
(12V/34W) x 4
Back-up time @ full load
10 mins
4-5 mins
4-5 mins
4-5 mins
Recharge time to 90% cap
4 hours
Charging Current
1.5A
Min. Battery Start up Voltage
16
16
24
32
Transfer time.
Typical 4~6 ms.
Input protection
Breaker
Surge capability, peak current
capability
6500A/780 Joule
Communication
USB and RS232 (One port works at a time)
Overload Protection
UPS automatic shutdown if overload exceeds 110% nominal at 20 sec and 125% at 5 sec
Short circuit protection
Yes
SNMP Card Slot
SNMP slot provision. Must be integrated in the UPS
