Modifications
Reserved
19
OPM_ITS_USM_M06_M20_0US_V011 (09/2007)
Step 10.
Slide the batteries into the UPS. Allow enough working space to make the final wiring connections in step
below.
Step 11.
Final connections:
•
600 & 1000 VA: Connect the Black Wire as shown in diagram above.
•
1500 & 2000 VA: Connect the Red Wire as shown in diagrams above.
Step 12.
Install Metal Battery cover plate: Install metal plate with Phillips-head screws.
Step 13.
Re-Install Left front cover first by using the Phillips-head screws. Put the Right front cover on the Right side
first; press the left side into the UPS.
Step 14.
Battery replacement complete.
Rack Mount Procedure -
Step 1.
Remove front cover panel; pull out from the middle left. (See diagrams below)
600VA & 1000VA
1500 & 2000VA
Step 2.
Push front cover panel to the right slightly to allow front cover to be moved to the side. (See diagrams below)
