GE AKTA Valve INV-907, Инструкция по эксплуатации

Страница: 20 / 24

20 Valve INV-907 Instructions 56-8101-01 Edition AE
6 Reference information
Physical data
Internal volume
Pos 1 LOAD
Port
1–7 9 μl
Port 2–3 5 μl
Port 4–6 8 μl
Pos 2 INJECT
Port
1–2 7 μl
Port 3–5 6 μl
Port 6–7 9 μl
Pos 3 WASH
Port 2–4
8 μl
Port 5–7 9 μl
Flow channel diameter 0.8 mm
Valve principle Motor controlled valve
Functions Switching 3 positions controlled
from UNICORN
Degree of protection IP 43
Wetted materials PEEK (polyetheretherketone)
Chemical resistance The wetted parts are resistant to organic
solvents and salt buffers commonly used
in chromatography of biomolecules, except
100% ethylacetate, 100% hexane and
100% tetrahydrofuran (THF)
Power requirement 32 V DC ±10% from the system pump
Power consumption Up to 9 W
UniNet 2 address 0–9
Inlet and outlet tubing UNF 10–32 2B ”Fingertights” for capillary
tubing 1/16” outer diameter
Dimensions,
H × W × D 135 × 80 × 120 mm
Weight 1.2 kg
EMC Standards This device meets the requirement of the
EMC Directive 89/336/EEC through the
following harmonized standards:
• EN 61326 (emission and immunity)
• EN 55011, GR 2, Class A (emission)
• This device complies with part 15 of
the FCC rules (emission). Operation is
subject to the following two conditions:
1 The device may not cause harmful
interference.
2 This device must accept any
interference recieved, including
interference that may cause
undesired operation.