background image

11

Invert Switch

If the switch is accidentally installed upside down with “On” at the 
bottom and “Off” at the top, the default On/Off rocker settings can 
be reversed by changing parameter 4’s value to “1”.

•  Parameter No: 4

•  Length: 1 Byte

•  Valid Values = 0 or 1 (default 0)

Restoring Factory Defaults

All Configuration Parameters can all be restored to their factory 
default settings by using your primary controller to delete/reset
the device. 

Interoperability with Z-Wave

 Devices

A Z-Wave™ network can integrate devices of various classes,
and these devices can be made by different manufacturers. 
Although every Z-Wave certified product is designed to work with 
all other Z-Wave certified products, your controller must include 
the appropriate device classifications in order to control non-light-
ing Z-wave devices. As an example, the GE 45600 basic remote 
is designed only for controlling Z-Wave devices using the lighting 
control classification. The GE 45601 deluxe remote with LCD read-
out can control other Z-Wave certified devices like thermostats as 
well as lighting.

WARRANTY

JASCO Products warrants this product to be free from manufac-
turing defects for a period of two years from the original date of 
consumer purchase. This warranty is limited to the repair or replace-
ment of this product only and does not extend to consequential or 
incidental damage to other products that may be used with this 
product. This warranty is in lieu of all other warranties, expressed or 
implied. Some states do not allow limitations on how long an implied 
warranty lasts or permit the exclusion or limitation of incidental or 
consequential damage, so the above limitations may not apply to 
you. This warranty gives you specific rights, and you may also have 
other rights which vary from state to state. Please contact Customer 
Service at 800-654-8483 (option 4) between 7:30AM – 5:00PM CST 
or via our website (www.jascoproducts.com) if the unit should prove 
defective within the warranty period:

JASCO Products Company
Building B, 10 E Memorial Rd.
Oklahoma City, OK 73114

Содержание 45609














Отзывы: