GE Security Security Lend Camera, Быстрое руководство

Страница: 8 / 19

7 | Basic programming
TIPs
•
There are 127 presets (1 through 127) for
each dome. If you are using presets 62
and 63 for the left and right autopan limits,
then you have a total of 125 presets.
•
Most keypads have a limited number of
preset numbers they can call. If you are
using a 1.2.09 or later version of the GE
KTD-405 keypad, you can call up all 127
preset numbers directly from the keypad.
Earlier versions of the keypad can call
up only the first 63 preset numbers.
Note: To verify your keypad’s version, press and
hold the
mon key until the keypad beeps,
then press the key.
•
If the keypad does not allow you to
program preset numbers 1 through 57
using the
store key, you will need to
enable the lower preset numbers in the
keypad’s programming. Refer to the
keypad’s user manual.
•
The dome provides the ability to remap
any preset or tour command coming in
from a keypad to activate any of the 127
presets, 16 tours, or 32 macro actions.
This enables you to manually initiate
any of the expanded capabilities of the
dome from keypad controllers with
limited command capability. Refer to the
user manual for details.
Programming presets from the keypad
1. Use the joystick to pan, tilt, and zoom the
camera to the desired view.
2. Press store (
store
) on the keypad.
3. Press the number keys on the keypad that
correspond to the preset number you want
to assign for this view.
4. Press store (
store
) again.
5. Optional: Verify your individual presets by
pressing find (
find
), then pressing the
number keys that correspond to a preset.
Note: You can reprogram any presets that you are
not satisfied with.
6. Optional: Go into the menus and customize
the preset with a title and exposure settings.
7 | Basic programming - presets
Basic programming
Presets and ShadowTours are the most frequently used programmable features of domes. Use the
following procedures to program them quickly.
Presets
You can set presets from the keypad or with the menus. If you set presets from the keypad, you
may want to go into the menus to customize them with titles and exposure settings.
Programming presets with the menus
1. Access the menus (page 5).
2. Select:
a. Actions ;
b. Presets ;
c. Edit ;
d. a preset
number;
e. and POS .
3. Use the joystick to pan, tilt, and zoom the
camera to the desired view.
4. Press iris+ (
+
iris
-
) or set ( ) to
save the preset position, or press iris-
(
+
iris
-
) or esc (
esc
) to cancel it.
5. After you have saved a preset position, you
can use the other options on the Edit , Display ,
and Advanced tab pages to customize the
preset’s title, duration, and exposure settings.
Command Keypad shortcut
Set a preset store | (number) | store
Set the left autopan limit store | | store
Set the right autopan limit store | | store