GE Security Security Lend Camera, Быстрое руководство

Страница: 17 / 19

16 | Advanced programming - resetting and rebooting
Resetting the dome
You can reset the dome whether or not you have valid communication
between the keypad and the dome.
To reset the dome, cycle the power to the dome by turning the power
off then on.
Rebooting the dome
If you are using a GE KTD-405 keypad, and have valid communication between the keypad and the
dome, then you can easily reboot when necessary.
Note: You cannot currently reboot Legend domes from other keypads.
To reboot a dome, do the following from a KTD-405 keypad:
1. At the normal display (CAMERA #/MONITOR #), press and hold set ( ) until you hear a beep
and the programming code display appears on the keypad’s LCD.
2. At the ENTER PROGRAMMING CODE: display, enter the reset access code by pressing 1 , 4 , 7 , 6 ,
and seq .
3. At the RESET TO DEFAULTS? display, press iris+ (
+
iris
-
) to select YES.
4. At the reset which display (ALL BUT TITLES, ALL, or CAMERA), press 3 to select CAMERA.
5. At the RESET CAMERA #? ARE YOU SURE? display, press iris+ (
+
iris
-
) to select YES.
The camera reboots in about 60 seconds. You will see the RESETTING CAMERA # display on
the keypad LCD, and the splash screen and color bars on the monitor screen, as the camera
reinitializes itself.
o
I
TIPs
Resetting or rebooting a dome does not
change or clear any programmed settings.
If you want to clear any programmed
settings, you need to clear the memory
via the options on the
Memory screen
under Setup .