GE Security Security Lend Camera, Быстрое руководство

Страница: 14 / 19

13 | Advanced programming - command mapping
Command mapping
The dome provides the ability to remap any preset or tour command coming in from a keypad to
activate any of the 127 presets, 16 tours, or 32 macro actions. This enables you to manually initiate
any of the expanded capabilities of the dome from keypad controllers with limited capability.
Command mapping does not affect any of the internal command operations the dome performs,
such as resume and alarm actions. It only affects the actions the dome will perform when it
receives a command from an external device (keypad or alarm interface).
An example of remapping is using a preset command from the keypad (for example, Preset 7) to
run a macro (for example, Macro 1). In the command map programming, you would select the
command you wish to use (in this case, Preset 7) and remap that command to activate an assigned
action (in this case, Macro 1). See the user manual for complete details.
TIPs
•
When changing settings on any
programming page, you need to
confirm the new settings by selecting
OK on that page.
•
Most keypads have a limited number of
preset numbers they can call, which will
limit how many commands can be
remapped. If you are using a v1.2.09 or
later version of the GE KTD-405 keypad,
you can call up all 127 preset numbers
directly from the keypad. Earlier
versions of the keypad can call up only
the first 63 preset numbers.
Note: To verify your keypad’s version, press and
hold the
mon key until the keypad beeps,
then press the key.
To remap a preset or tour number to activate another action:
1. Access the menus (page 5).
2. Select
Control .
3. Select Command Map .
4. Under Command , select a command group
(preset or tour) to remap. ( Preset , in the
example.)
5. Under Auxiliary input , select a number (for
example, 7) from that group to remap.
6. Under Assigned action , select an action
group (preset, tour, or macro) to assign to
that command number. (
Macro , in the
example.)
7. Under Auxiliary input , select a number (for
example, 1) from that assigned action group
to assign to that command number.
8. Select Update . You have now remapped the
command (Preset 7) to activate the assigned
action (Macro 1).
9. Complete steps 4 through 8 for additional
commands.