GE Security NX-1750 ProxPad, Руководство по установке

Страница: 17 / 27

Location 6 Programming the Closing Time for Schedule 1
(2 segments of numerical data)
Segment 1 Program the hour of the closing time in 24-hour format. (Default is 20 = 8:00 PM)
Segment 2 Program the minutes after the hour of the closing time for Schedule 1. (Default is 0 )
Location 7 Programming the Days for Schedule 1
(1 segment of binary data)
LED1 =
"On" if schedule is active on Sunday.
LED2 =
"On" if schedule is active on Monday.
LED3 =
"On" if schedule is active on Tuesday.
LED4 =
"On" if schedule is active on Wednesday.
LED5 =
“On” if schedule is active on Thursday.
LED6 =
“On” if schedule is active on Friday.
LED7 =
“On” if schedule is active on Saturday.
LED8 =
“On” if schedule is disabled on holidays.
Locations 8-28 Programming the Schedules 2 - 8
Locations 8 – 28 are used to program the opening times, closing times, and days for Schedules 2 - 8. Each
schedule has three locations that are programmed with the same steps as Schedule 1 described previously. Refer
to Schedule 1 (Location 5) for specific instructions.
Location 8 – Opening Time for Schedule 2 Location 20 – Opening Time for Schedule 6
Location 9 – Closing Time for Schedule 2 Location 21 – Closing Time for Schedule 6
Location 10 – Days for Schedule 2 Location 22 – Days for Schedule 6
Location 11 – Opening Time for Schedule 3 Location 23 – Opening Time for Schedule 7
Location 12 – Closing Time for Schedule 3 Location 24 – Closing Time for Schedule 7
Location 13 – Days for Schedule 3 Location 25 – Days for Schedule 7
Location 14 – Opening Time for Schedule 4 Location 26 – Opening Time for Schedule 8
Location 15 – Closing Time for Schedule 4 Location 27 – Closing Time for Schedule 8
Location 16 – Days for Schedule 4 Location 28 – Days for Schedule 8
Location 17 – Opening Time for Schedule 5
Location 18 – Closing Time for Schedule 5
Location 19 – Days for Schedule 5
Location 29 Programming the Date of Holidays in January
(8 segments of numerical data) Program the day of the month in January that the Opening time in a schedule is
suppressed. For example, if the opening should not occur on January 1, program a “1” in Segment 1. This feature
can be repeated up to a maximum of 8 holidays per location (month). (Default is No holidays )
Locations 30-40 Programming the Date of Holidays from February to December
(8 segments of numerical data) Locations 30 - 40 are used to program the day of each month, from February to
December, in which the Opening time in a schedule is suppressed. Each location will accommodate up to a
maximum of 8 holidays, and programmed with the same steps as Location 271 described previously.
Location 30 – February holidays
Location 31 – March holidays
Location 32 – April holidays
Location 33 – May holidays
Location 34 – June holidays
Location 35 – July holidays
Location 36 – August holidays
Location 37 – September holidays
Location 38 – October holidays
Location 39 – November holidays
Location 40 – December holidays
NX-1750 Installation manual Page 17 18/02/05