GE Security CyberDome II, Руководство по установке

Страница: 11 / 64

Chapter 1
Introduction
3
System requirements
For proper operation, adhere to the following operational, load, cable, and power requirements for
CyberDome II domes.
Operational requirements
CyberDome II contains a built-in receiver that decodes commands originating from a compatible controlling
device, such as a keypad or ASCII control software. A minimum of one controlling device is required for
operation, as shown in
Figure 1 . In this typical DVR system, an operator can pan, tilt, and zoom the camera,
find presets, and start preset and ShadowTours from the keypad.
Figure 1. Typical DVR system
Figure 2 shows a typical network system, and Figure 3 on page 4 shows an enhanced system.
Figure 2. Typical IP system
SymDec 16 DVR
(IP digital video recorder)
I/O box KTD-405A
controller keypad
CCTV
monitor
RS-485
Video
CyberDome II
RS-485
SymNet
IP encoder/decoders
I/O box KTD-405A
controller keypad
CCTV
monitor
TCP/IP
Video
CyberDome II