GE MDS MDS iNET-II 900, Справочное руководство

Страница: 84 / 190

74 iNET Series Reference Manual 05-2806A01, Rev. H
Figure 2-38. Remote Radio Serial Port Configuration
2.6.8 Point-to-Point Serial-to-Serial Application
Example
Once the transceivers are configured and the changes have been exe-
cuted, they begin processing any data presented at the
COM
ports. Data
presented at the Access Point’s
COM
port will be packetized and sent via
UDP to the Remote. Upon receiving the packet, the Remote strips the
data out of the UDP packet and sends it out its
COM
port. Likewise, data
presented at the Remote’s
COM
port is packetized, sent to the Access
Point, stripped, and sent out the Access Point’s
COM
port. Note, this
configuration does not use multicast addressing.
Invisible place holder
Figure 2-39. Point-to-Point Serial-to-Serial Application Diagram
EIA-232
RTU
EIA-232
Terminal
or Computer
192.168.0.10 192.168.0.1 192.168.0.2
Remote
Access Point
LA
N
COM
1
COM
2
PW
R
LIN
K
Table 2-3. Serial Port Application Configuration
Transceiver Location Menu Item Setting
Access Point (COM2)
1
Status Enabled
Data Baud Rate 9,600 (Example)
Flow Control Hardware (Example)
Serial Mode Seamless
SIFD 4
IP Protocol UDP