GE MDS MDS iNET-II 900, Справочное руководство

Страница: 141 / 190

05-2806A01, Rev. H iNET Series Reference Manual 131
Invisible place holder
Invisible place holder
.
Figure 4-3. Mounting Bracket Dimensions
DIN Rail Mounting Option
The unit may also be mounted with an optional 35mm DIN Rail
Mounting Bracket (Part No. 03-4022A02). Equipment cabinets and
racks of recent design often employ this type of mounting. Once the DIN
bracket is mounted to the iNET case, it allows for quick installation and
removal of the radio without the need for tools of any kind. Figure 4-4
shows how the DIN Rail bracket attaches to the back of the unit’s case,
and how the entire unit attaches to the mounting rail.
Invisible place holder
Figure 4-4. DIN Rail Mounting of GE MDS Equipment
4.1.2 Site Selection
Suitable sites should provide:
• Protection from direct weather exposure
• A source of adequate and stable primary power
2.75
˝
(7 cm)
7.25 ˝ (18.4 cm)
Step 1: Attach the bracket using the
Step 2: Snap the assembly onto the
DIN Rail. Removal is performed by
the two screws provided. (Attach to
pulling down on the release tab.
the end opposite the connectors.)
Release Tab