GE Interlogix KTC-510, Руководство пользователя

Страница: 6 / 16

Setup KTC-510/515/540C/810C/815C/840CE
6 1041080A / March 2003
To set up the camera, see Figure 2 and perform the following:
Note: For back focus instructions, see section 3, Additional Adjustments.
DIP switch
Phase adjust
buttons DD level
Lens
mode
switch
Figure 2. Camera controls
1) If you are using a C-mount lens, screw on the C-mount adapter.
2) Screw the appropriate lens to the camera.
3) Set the lens mode switch
(Figure 3) to correspond
with the lens:
•
For an auto iris lens
without amplifier (DC
type), set the lens mode
switch to DD.
• For an auto iris lens with
built-in amplifier (VIDEO
type), set the lens mode
switch to VD.
• For a manual iris lens, set the lens mode switch to AES.
4) If you are using an auto iris lens, insert the iris lens plug into the
auto iris lens connector. (See Figure 1.)
AES—manual iris lens
VD—video drive lens
DD—DC drive lens
Figure 3. Lens mode switch settings