GE Interlogix KTC-510, Руководство пользователя

Страница: 14 / 16

Troubleshooting KTC-510/515/540C/810C/815C/840CE
14 1041080A / March 2003
T
ROUBLESHOOTING
Problem Probable Cause Solution
Lens cap is still in
place Remove the lens cap
No power to the
camera Check that the power
LED at the camera is lit
If the LED is not lit, check
the camera power supply
Monitor is not
functioning properly Connect a test monitor to
the MON OUT connection
to check for a local video
signal
No picture on the
monitor
Camera is not set up
properly for the lens
type Set the lens selection
switch for the type of lens
being used (VD, DD, or
AES) (Figure 3)
Ensure that the auto iris
plug in is connected
properly (Figure 4 and
Figure 5)