0150-0242C
39
Kalatel DVMRe
Matrix
1. Rotate the
Jog
to navigate, and the
Shuttle
to change the values.
2. To save changes and exit the menu: Select
[OK]
, and then press the
Enter
button.
3. To exit the menu without making changes: Press the
Menu
button, or select
[CANCEL]
, then
press the
Enter
button.
q
Main Menu
→
Record
→
Event Record Rate
The unit will record at the Event Record Rate when an Event is activated. Events can be activated by
RS232 event generation or activity detection. See
Event Settings
on page 35.
Record rates are measured in both Pictures Per Second (pps) and Seconds Per Picture (spp).
The maximum record rate per camera is inversely proportional to the number of cameras connected to
the unit. The fewer cameras connected, the higher the maximum record rate for each camera, and vice
versa. The maximum record rate for multiple cameras is 48pps (NTSC)(40pps PAL). The maximum
record rate for a single camera is 30pps (NTSC)(25pps PAL).
The bottom right corner of the menu contains a record duration calculator. The top line indicates the
estimated recording time of the cameras in Event record mode only. The bottom line indicates the
estimated recording time, taking into consideration the amount of time the unit will spend in Time-lapse,
Activity, Event, and/or Alarm record mode.
Event Record Rate
Camera 1 :
Camera 2 : 0.29 pps 3.5 spp
Camera 3 : 0.34 pps 2.9 spp
Camera 4 : 0.57 pps 1.8 spp
:
:
:
Camera 15 : 0.40 pps 2.5 spp
Camera 16 : 0.40 pps 2.5 spp
0.40 pps 2.5 spp
[CANCEL] [OK]
125 days 8 h (EVENT)
10 days 7 h (Total)
% Time: 4%
Estimate of the % of time each
camera will typically spend in
Event mode. For example if you
expect to have about 20 total
events each day, each lasting 3
minutes on average, then the %
of the time will be
(1 hour/24 hours)
4%.
% Time: 4%
1. Rotate the
Jog
to navigate, and the
Shuttle
to change the values.
2. To save changes and exit the menu: Select
[OK]
, and then press the
Enter
button.
3. To exit the menu without making changes: Press the
Menu
button, or select
[CANCEL]
, then
press the
Enter
button.
q
Main Menu
→
Record
→
Activity Record Rate
The unit will record at the Activity Record Rate when the camera is in normal Timelapse Record Mode
and activity is detected in the camera scene. Activity should not be linked to Event, in which case the
Event Record Rate will be used.
Содержание Kalatel DVMRe Matrix
Страница 92: ...0150 0242C ...
