manualshive.com logo in svg

GE Interlogix Kalatel DVMRe Matrix, Руководство пользователя

Поделиться
Скачать
GE Interlogix Kalatel DVMRe Matrix Скачать руководство пользователя страница 10

0150-0242C 

10 

Kalatel DVMRe

 

Matrix 

6.  Aux Port: 

For connecting the Accessory PCB for Audio inputs and outputs.

 

7.  RS485 Port 1 Connector:

  For connecting to keyboard and other RS485 devices. 

8.  10/100 Ethernet Port:

  For connecting to remote PC via ethernet network. 

9.  Composite Monitor-B Output:

  Composite video output with BNC style connector. 

10.  Y/C Monitor-B Output:

  Y/C video output with 4-pin mini-DIN style connector. 

11.  SCSI Port:

  For connecting SCSI compatible archive devices. 

12.  IEEE 1394 Firewire Port:

 For connecting Firewire compatible archive devices. 

13.  RS232 Port 1:

  For modem connection and external control of the unit. 

14.  RS485 Port 2 Connector:

 For connecting to keyboard and other RS485 devices. 

15.  RS232 Port 2:

  For Event Generation and ASCII Text insertion. 

Camera Inputs 

Cable:

  75-Ohm Coaxial 

Connectors:

  BNC 

Auto Terminating:

  Yes 

Passive Looping:

  Yes 

There are two BNC jacks for each camera.  Either 
jack can receive a camera signal.  The signal is 
looped (directly connected to the other jack), making 
the camera signal available to other equipment. 

The camera input connectors are Auto Terminating.   

 

This means that the input signal will automatically be terminated with 75-Ohms unless a 2

nd

 cable is 

connected to the 2

nd

 BNC connector of the same camera input.  Make sure there is 75-Ohm 

termination at the end of the video line if the signal is looped through the DVMRe Matrix.   

Time base correction is performed during digital capture.  As a result, cameras do not require 
synchronization. 

See section 3.14 for information about disabling unused camera jacks in the menu system. 

  

Composite Monitor Output 

When connecting directly from the DVMRe Matrix to 
the monitor, select the 75-Ohm impedance setting on 
the monitor. 

Cable:

  75-Ohm Coaxial 

Connectors:

  BNC 

 

If an additional device is connected to the monitor’s looping output, set the termination of the additional 
device as 75-Ohm, and set the termination of the monitor as Hi-Z (High Impedance). 

 

Y/C Monitor Output 

Y/C video output has a 4-pin mini-DIN style 

connector.  This style of connection is also referred to 
as SVHS and S-Video.  

Cable:

  75-Ohm Coaxial 

Connectors:

  BNC 

 

Alarm I/O Port 

The back panel of the unit is equipped with an Alarm 
Port (DB-25 style connector).

 

Do not attempt to wire directly to the DB-25 
connector on the back panel.

 

 

DB-25 Connector on Back Panel 

Connect the Alarm PCB (supplied with the unit) to the Alarm Port.  Wire all alarm inputs to the Alarm 
PCB per the pin out specifications shown below.

 

Содержание Kalatel DVMRe Matrix





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды