14
Instructions - 28-9414-37 Edition AA
Control Units CU-950 and CU-960
6
CU-960 only:
Installation on ÄKTAprocess
The CU-960 is delivered pre-installed in all ÄKTAprocess systems. All necessary
connections are made and tested already when the system is assembled before
delivery. The unit is mounted in a rack adaptor which is mounted in the
instrument rack inside the electronics cabinet of the ÄKTAprocess system, as
illustrated below.
Figure 6-1.
CU-960 mounted in an ÄKTAprocess system.
Note:
When the CU-960 is mounted in the system cabinet the indicator LEDs may
not be visible since the front of the unit is facing inwards.
WARNING!
Only personnel authorized by GE Healthcare are allowed to open
the electronics cabinet of the ÄKTAprocess systems.
