GE Consumer & Industrial GE AIR 107, Руководство пользователя и инструкции по установке

Страница: 4 / 16

7
English
6
Remote control
Remote controller with cover closed
General remarks
• Be sure there are no obstructions
between the receiver and the remote
control unit. The unit has a range of
approximately 8 meters.
• Do not expose the remote control unit to
moisture, excessive direct sunlight or heat.
• Do not drop or throw the remote
control unit.
• When restarting, the unit resumes
operating on the last mode set before
shut down. The outdoor unit will restart in
approximately 30 seconds.
1. ON/OFF button
Press this button to turn the unit on or off.
Additional control buttons are available under the swing
out door.
2. TEMP button
Set temperature up or down by 1°C by pressing the
PLUS (+) or MINUS (-) button once. Temperature can be
set on COOL, DRY and HEAT modes between 16°C and
30°C. HEAT mode not available on models
GE AIR 326 and GE AIR 428.
3. MODE button
Select the desired mode of operation by pushing this
button. The unit can operate on: AUTO, COOL, DRY, FAN
or HEAT modes. Heat mode not available on models
GE AIR 326 and GE AIR 428.
4. FAN button
Press this button to change fan speed.
There are three speeds to choose from, or set the
FAN to AUTO to let the unit control the air flow.
5. SWING button
Press to start louver moving automatically.
Press again to stop louver moving.
AUTO mode
COOL mode
DRY mode
FAN mode
HEAT mode
➁
➃
➀ ➂
➄
Remote controller with cover open
➂
➀
➁
1. SLEEP button
Press to set the sleep function.
2. TIMER ON button
When the unit is off, press TIMER ON button to turn it on
automatically at a specified time up to 24 hours ahead.
3. TIMER OFF button
Press TIMER OFF button to set the time the unit
automatically turns itself off up to 24 hours ahead.
Note: the AIR, HUMID, ANION and SAVE features are not
available on models covered by this manual.