background image

5

English

4

• Make sure you push the power plug all

the way into the socket. Failure to do so
can cause an electric shock, overheating
or even a fire.

• Do not remove the power plug while the

machine is operating except in an
emergency.

• Never use an extension cord or splice the

power cord.

• Never share the same power outlet with

another electric appliance.

• Do not insert the power plug into the

outlet with wet hands.

• Never insert fingers or objects into the air

intake or outlet vents.

• Do not aim chilled or heated air directly

onto the body for long periods.

• Disconnect the power supply

immediately if you smell burning or
smoke and contact your service center.

• Do not attempt to repair the air-

conditioner yourself.

• Consult with a professional electrician to

ensure that adequate circuit breakers,
fuses and other safety devices are in
place.

• Disconnect the unit whenever it will be

out of service for extended periods.

• Always disconnect the power supply

before cleaning the machine.

• Never pull on the cord to remove the

power plug.

• Do not place a space heater near the

air conditioner. Airflow from the air

Important safety information
Read all instructions before use

conditioner can cause incomplete
combustion in a space heater, resulting
in dangerous fumes.

• Keep combustible sprays away from the

unit.

• Ensure that the unit is mounted securely.
• Do not place objects on the unit.
• Never block the air intake or outlet vents.
• The indoor unit must be installed at least

2,0 m from the ground.

• Extreme temperature differentials can be

harmful to health.

• Do not use the air-conditioner for drying

clothes, preserving foods or other
functions for which it was not designed.

• Splashing water on the unit may cause

an electric shock and malfunction.

• The ground (earthing wire) must be

properly connected. Do not connect the
earth wire to a gas or water pipe,
lightning rod or telephone earth lines.

• The unit must be operated with a stable

voltage in the range of 198-253 Volts.

Name and function of parts

1. Surface panel 
2. Air filters and cleaners
3. Shell
4. Key switch

1

5.  Louver
6. Power plug

2

7. Drain hose
8. Wireless remote controller
9. Connection pipe

3

10. Air outlet cover

Air in

Air in

Air out

Air out

(1)

Not on models GE AIR 116, GE AIR 121, PRO AIR I109 and PRO AIR I112.

(2)

These models do not have a power plug on the indoor unit as they are powered through the outdoor unit:
GE AIR 218, GE AIR 224, GE AIR 326, GE AIR 428, PRO AIR 218. GE AIR 116 and GE AIR 121 are powered
through the indoor unit and do not have a power plug.

(3)

The following models have more than one indoor unit and two connection pipes. Models not mentioned
below have one indoor unit and two connection pipes.
- Two indoor units and four connection pipes for models GE AIR 218, GE AIR 224 and PRO AIR 218
- Three indoor units and six connection pipes for model GE AIR 326
- Four indoor units and eight connection pipes for model GE AIR 428

Owner’s Manual

WARNING!
Use this appliance only for its intended purpose as described in this Owner’s Manual

When using electrical appliances, basic safety precautions should be taken, including the
following:

Содержание GE AIR 107

















Отзывы: