ZXR-40A
- 5 -
2 0 0 7 . 0 1 . 0 1
Set
Measurement method: Three phase
Testing current: 20 A
View
W
iri
ng
D
ia
gra
m
Mode
Current
Measure
1 4 : 0 2 : 5 1
“Set” key-press:
Set the current date and time.
“View” key-press:
View the data stored, including measurement results, testing date, tapping
number and etc.
“Mode” key-press:
Sets the measurement mode, including “Single Phase”, “Two-phase” and
“Three-phase”, besides, corresponding schematic wiring diagram will be
displayed in the zone of “Schematic Wiring Diagram” as the reference for
actual wiring.
“Current” key-press: Sets the size of testing current. In case of the single-phase or two- phase
measurement, the current 1A, 5A, 10A and 20A can be selected. You may
select suitable measuring current by referring to the related parameters
listed in the technical indicators as the reference.
“Measure” key-press: After the testing wire is connected and the measuring current is selected,
press “Measure” key-press to start the test.
2
Single-phase measurement:
The wiring method is shown in the figure below (Taking the measurement as of R
AB
an
example):
