14. AUTOMATION SETUP
INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT
-73-
26 Feb 2018
14.4 Automation setup for Christie ACT devices
The LPU-1000 supports Christie ACT automation device. Follow the steps below to configure a Christie ACT
device in the server automation interface.
1. Click
[Add]
under
[Devices]
and enter the name of the device. In this case, it is
[ChristieACT].
Set the
device type to
[ChristieACT].
2. Click
[OK]
and set up the device parameters for the Christie ACT device.
Christie ACT automation device setup
3. Enter the IP address of the Christie ACT device.
4. The default setting for the
[Port]
is displayed on the settings for the Christie ACT device. Change this value
if required.
5. Default control cues will be set up for a new Christie ACT automation device. Control cues can be added or
removed by clicking on the [+] and [-] buttons.
2
1
