14. AUTOMATION SETUP
INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT
-69-
26 Feb 2018
14.2 Automation setup for eCNA devices
The LPU-1000 supports the eCNA-10 automation system. Follow the steps below to configure an eCNA device in
the server automation interface.
1. Click
[Add]
on
[Devices]
and enter the name of the device. In this case, it is
[eCNA].
Set the device type to
[eCNA_IO].
2. Click
[OK]
and set up the device parameters for the eCNA device.
eCNA automation device setup
3. Enter the IP address of the eCNA device.
4. The eCNA device has many cues available for automation. These cues can be enabled or disabled by
selecting them after clicking the
[Server events], [eCNA controls],
and
[eCNA status]
buttons. All cues are
disabled by default.
2
1
