8. MEDIA BLOCK NETWORK SETUP
INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT
-57-
26 Feb 2018
8.
Media Block Network Setup
The IP addresses on the media block may need to be changed for proper operation. The following section shows
the procedures.
8.1 Media Block Network Setup
Follow the following instructions to change the IP addresses on the media block.
1.
From the
[SMS],
click on
[Configuration].
2.
Select
[Maintenance access]
from the top dropdown menu.
3.
Enter the password and select
[OK].
4.
Select [
IMB Network]
tab.
5.
Set the
[Subnet Mask]
for IMB Ethernet 2 and SOM IP address.
6.
Set the
[IP address]
for IMB Ethernet 2. This is the IP address of the Security Manager.
7.
This is the main
[IP address]
of the media block. The SMS interface can be reached at this IP address
using VNC.
8.
Set the
[Network gateway]
for the media block.
9.
Set an
[IP address]
and
[Subnet Mask]
for
[IMB Ethernet 1]
of the media block.
This is an optional network setting which can be used for media block sync and Dolby Atmos
connections.
10.
Set an
[IP address]
and
[Subnet Mask]
for
[IMB Ethernet 3]
of the media block.
This is an optional network which can be used to connect to a content management network.
11.
Once the settings have been entered, click on
[Validate IPs].
12.
If all of the IP addresses are valid, you will get the following pop-up window:
11
5
6
7
8
9
10
