DU-LC-0002-60 Rev C 6/14/06 GCX Corp. Page 9 of 11
3. Thread two (2) M4 x 10mm PHMS into two (2) upper holes on Mounting Adapter (below left). Leave 1/4'' [6 mm] of
thread exposed to allow screws to fit into slots in VESA Mounting Plate.
4. Guide two (2) upper screws into slots in VESA Mounting Plate (below right). Do not fully tighten these screws until
instructed in Step 5.
5. Thread two (2) M4 x 10mm screws into two (2) lower mounting holes (below left). Tighten all mounting screws.
M4 x 10mm PHMS (2)
VESA Mounting Plate
M4 x 10mm PHMS (2)