DU-LC-0002-60 Rev C 6/14/06 GCX Corp. Page 6 of 11
5.0 Attaching the Sensor Interface Bracket/Cord Loop Hook
Parts Reference
The following parts and hardware are provided for this procedure:
Tools Required
Phillips screwdriver (not provided).
1. Position Clamping Blocks (Bracket and Hook) at desired height on Roll Stand Post and fasten Rear Block to Front
Block (below left) with two (2) #10-32 x 9/16'' PHMS.
2. Mount Sensor Interface by inserting four (4) mounting studs into slots in mounting bracket and sliding downward into
locking position (below center).
Item #
Description
Qty
1 Sensor
Interface
Bracket/Front Clamping Block Assembly
1
2
Cord Loop Hook/Rear Clamping Block Assembly
1
3
#10-32 x 9/16'' Pan Head Machine Screw (PHMS)
2
Sensor Interface
#10-32 x 9/16'' PHMS (2
1
2