GCE ARCONTROL 161, Руководство по эксплуатации

Страница: 4 / 68

4/68
Make sure welding machine and power cable to be far away from the operator as far as possible according to the
actual circumstance.
Connect the work cable to the workpiece as close as possible to the area being welded.
People with heart­pacemaker should be away from the welding arc.
ARCONTROL are welding machines for MMA arc welding which adopts the latest Pulse Width Modulation (PWM)
technology and the Insulated Gate Bipolar Transistor (IGBT) power module. It can change work frequency to medium
frequency to replace the traditional hulking work frequency transformer with the cabinet medium frequency transformer.
Thus, the welding machine is featured by portability, small size, low consumption, etc.
ARCONTROL welding machines have excellent performances: constant current output makes welding arc more stable;
fast dynamic response speed reduces the impact from the arc length fluctuation to the current; accurate stepless current
adjustment and pre­setting function. There are also some automatic protection functions for under voltage, over current,
over heat, etc. inside the welders, when the problems listed before occurred, the alarm on the front panel is light and at
the same time the output current will be cut off. It can self­protect and prolong the using life and greatly improved the
reliability and practicability of the welders.
ARCONTROL welding machines can also realize TIG operation. While MMA operation, if the electrode touches work
piece over two seconds, the welding current will drop to the minimum current automatically to protect the electrode. While
TIG operation, the minimum current will be outputted firstly until the arc is ignited by lifting method, the output current will
rise to the pre­set value, which can protect the electrode.
Built­in extra functions
"Hot Start" function for easier arc striking.
"Arc Force" to prevent electrode sticking to the workpiece. Smoother welding and deeper penetration.
"Anti­sticking" device to prevent overload and ease the electrode removal from the workpiece.
Fully protected against over­voltage, under­voltage, and over­heat.
Generator friendly. Designed to work with diesel generators and to avoid failures due to its voltage spikes.
1 piece Welding machine.
1 piece Cable + Con Earth Clamp
1 piece Cable + Con Electrode Holder
1 piece Operation manual (via QR code).
This device has been designed and manufactured in accordance with the requirements of
Directive 2014/30/EU – EMC on electromagnetic compatibility
Directive 2014/35/EU – LVD on low voltage devices
and it is thus CE marked.
The welding machine complies with the standards EN 60974­1: 2012 and EN 60974­10: 2014 and is identical to the
sample certified by ECMG Electronic Technical Testing Corp.
The Declaration of Conformity can be requested by filling out the form in the contact section of our website
www.gcegroup.com.
Model
Power Supply Voltage 1­230 V ±10%
ARCONTROL 161
1­230 V ±10%
ARCONTROL 201
Frequency 50/60 Hz 50/60 Hz
Rated Input Power 8,2 kW (MMA)
5,5 kW (TIG)
10,6 kW (MMA)
7,1 kW (TIG)
Rate Input Current 35,6 A (MMA)
26,3 A (TIG)
46,0 A (MMA)
31,0 A (TIG)
Duty Cycle
(40°C 10 min)
160 A (40%)
135 A (60%)
105 A (100%)
200 A (30%)
145 A (60%)
110 A (100%)
No Load Voltage 70,8 V 63,0 V
Welding Current Range 10­160 A 10­200 A
Efficiency 80% 80%