GCC Technologies Jaguar J5-101, Руководство пользователя

Страница: 60 / 196

Jaguar V User Manual
The Control Panel 3-6
Up Accel. To set or modify tool acceleration levels while the tool move
from endpoint to next start point at horizontal moving. High, Medium,
Low Medium
[ CUT TEST ]
Square Cut To perform a cutting test at present blade position.
For more information, please refer to “4.3 Adjusting the
Cutting Force and Offset” to adjust blade force and cutting
speed.
Redo Jobs in
Memory
To redo the cut test jobs saved in memory by recutting or
producing cut test copies. Recut number: 0 means limitless. If
you want to set number as 0, you should set that between
repowering the cutter and putting down the lever. Recut (number of
jobs: 0-99)
Copy (number of
jobs: 1-999) Recut
Repeat AAS
Job
To repeat AAS jobs automatically without having to operate
on the computer side.
Please be noted that this feature is mainly applied to the
Single paper mode; please ensure a new piece of material
you wish to apply this feature on is loaded and the origin
repositioned to the first registration mark before starting.
When the first AAS job repeat completes, the user will be
offered the choice of “Repeat AAS Job Again”, please
press ”Online/Offline” to return to the main menu.
This option will appear after finishing reading all registration
marks.
Pattern Setting
To provide two patterns for cut test
Note: It is recommended to select “Cross” if you are working
on thick pieces of materials.
“Arrow” and
“Cross” patterns
“Arrow”
Note: the
default
pattern for
Jaguar
V_R is
“Cross”
Ratio Setting
To adjust the size of the pattern 100%, 200%,
300%, 400% 100%
Blade Length
Adjust
Please see 2.5 Automatic Blade Length Adjustment for
further details.
To adjust the length of the blade
Note:
1. Keep your blade length as 0 before you start adjusting.
2. Test the blade holder first and then test the blade length by
pressing ENTER.
3. Keep the blade holder at the same position when you
perform blade holder and blade length tests.
4. When blade holder and blade length tests are finished, the
screen will show you to what degree (the unit of the value
following “CW” or “CCW” is “circle”) and in which direction
[CW (clockwise) or CCW (counterclockwise)] you should
turn the adjustment knob.
EG, Turn CW 0.5 is telling you that you should turn the
knob for half a circle clockwisely.
The value on the screen will be 0.0 when the blade length is
perfect and no more adjustment needs to be made. You may
start cutting at this point.
0.00mm-5.00mm 0.00mm
[ DATA CLEAR ]
To clear up buffer memory.
[ TOOL SELECT ]
Set Smoothing
Cut To enable smooth-cutting function. Enable