Bengal user manual
3. Operation
3.1 The Control Panel
3.1.1
The Outline of control panel
Figure 3-1
Key
Function
POWER LED
To indicate the power status ( light up: power on; light off: power off )
ERROR LED
To indicate the error status ( light up: error; light off: normal )
ON/OFF LINE
To switch modes or stop cutting job( light up: on-line; light off: off-line )
While in on-line mode: only ON/OFF LINE and PAUSE keys activated
While in off-line mode: the settings in VLCD can be adjusted.
PAUSE
To temporarily halt cutting process or to continue
REPEAT
To repeat last job.
DATA CLEAR
To clear up buffer memory.
CUT TEST
To perform cutting tests in different ways.
ORIGIN SET
1. To reset origin at a new position in off-line mode.
2. To perform Media Sizing in on-line mode.
4 Arrow Keys
To move carriage position, select function, or change setting.
3.1.2 Reset Origin
Note:
9
Make sure the machine is in off-line mode to enable this function.
Operation
3-1
