AR-24 User Manual
Installation 2-10
Figure 2-19
Figure 2-20
(O)
(X)
Correct
Incorrect
2.4.2 Loading the Roll Media
You can use the stand with flexible media support system. Please refer to Chapter 2.2 for
hardware setup, and Chapter 2.5.1 for media loading.
2.4.3 How to change the poll size without turning off the machine?
Press origin set twice and the machine will start moving to get the new size. Then open the
VLCD and under the poll size you will find the new measurements.
2.4.4 Change the cushion periodically
Cushion in tool carriage is used to
absorb vibration and lower the noise caused by moving tool
carriage. It is suggested to replace the cushion every six months to retain the effect
.
