GBC PRO-TECH DS-60, Руководство по эксплуатации и обслуживанию

Страница: 5 / 36

DS-60 Operation and Maintenance Manual
© GBC Pro-Tech 1998 January 1-1
6HFWLRQ6DIHW\
Your safety, as well as the safety of others, is important
to GBC Pro-Tech. This section contains important
safety information.
The following symbols are used throughout this man-
ual to indicate warnings and cautions.
DANGER
WARNING
CAUTION
The DS-60 Heat Press has been designed with safety as
a primary consideration. However, you must become
thoroughly familiar with the controls, proper operation,
proper service procedures, and safety features of the
Heat Press before using or servicing the unit.
GBC Pro-Tech DS-60 Heat Press is a powerful
machine that is designed to perform vinyl transfer and
dye sublimation. The forces required to accomplish this
task can vary from negligible to very large.
In addition, the main roll of the DS-60 can reach tem-
peratures of 475
°
F (235
°
C). At these temperatures
there is a danger of a severe burn if the roll is touched
during set-up, operation or servicing.
Safety is an important feature of the DS-60 Heat Press.
It has emergency stop buttons and photoelectric eye
protection on both the infeed and outfeed sides of the
nipping rolls to prevent objects from entering the nip.
The heat press is equipped with four emergency stop
buttons located on the top front and back of either side
of the heat press. Any of these, if engaged, stops the
heat press. To continue operation all emergency stop
buttons must be in the up position and you must press
the reset button above the fuse panel on the back of the
heat press (see Figure 1-2).
Figure 1-1: Using the Emergency Stop Buttons
Figure 1-2: Resetting the Heat Press
DO NOT ATTEMPT TO OPERATE YOUR
DS-60 HEAT PRESS UNTIL YOU HAVE READ
THIS SECTION CAREFULLY!
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation
which, if not avoided, could result in minor or
moderate injury, or alerts against unsafe
practices, or alerts against actions which could
damage the product.
NOT AUS
EM
E
R
G
E
N
CY
ST
OP
AR
RE
TD
'
U
R
G
E
N
CE
NOT AUS
EM
E
R
G
E
N
CY
ST
OP
AR
RE
TD
'
U
R
G
E
N
CE
1/4 turn
Twist each button
to resume
operation - the
button pops up
Push any button
to stop the
laminator
Reset Button