ORCA-I Operation Manual
Safety and Warranty Information
GBC Pro-Tech 1997 October
1-3
Despite the safety features built into the ORCA-I
Laminator, extreme caution must be used when
operating or servicing the unit. READ THE
FOLLOWING WARNINGS AND CAUTIONS
BEFORE ATTEMPTING TO OPERATE OR
SERVICE THE ORCA-I LAMINATOR.
WARNING
Never place fingers or arms between the rolls
when they are turning or when the rolls are in
the closed position. You can be crushed or
burned.
WARNING
Do not wear ties, loose fitting clothing or
dangling jewelry while operating or servicing
the laminator. These items can get caught in
the nip and choke you or you can be crushed
or burned.
WARNING
Use extreme caution when operating the
laminator with the footswitch. The
photoelectric eye system is overridden and
your fingers can get caught in the nip. You can
be crushed or burned.
WARNING
Always use care in lowering the top laminating
roll. You can be crushed or burned.
WARNING
Do not operate the laminator near water. You
can be severely shocked, electrocuted or cause
a fire.
DANGER
Remove power from the laminator before
servicing. You can be severely shocked,
electrocuted or cause a fire.
WARNING
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
electrocuted or cause a fire. Use only a damp
cloth for cleaning.
WARNING
Exercise care when cleaning the rolls with
80% isopropyl alcohol:
•
Use only in a well ventilated area.
•
Wear rubber gloves.
•
Use only on cool rolls.
Cleaning heated rolls can ignite the fumes.
CAUTION
Use only 80% isopropyl alcohol or a rubber
cement eraser to clean the laminating rolls.
Harsh chemicals like toluene, acetone or MEK
destroy the silicone covering of the rolls.
CAUTION
Raise the upper main roll when the laminator
is not in operation. Prolonged contact can
damage the rolls.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500